Compound Salt Spray Test Chamber
Application of composite salt spray test chamber:
The composite salt spray test chamber can freely switch test conditions in three states of dry, wet and salt spray, more realistic simulation of natural environment, more realistic reaction test results, widely used in automobile, electronics, electroplating and other industries.
Test range: salt spray test, dry test, wet test.
The size of the inner and outer box of the compound salt spray test box:
1 Test chamber size (mm) 2000x1000x500
2 Dimensions of the test chamber (mm) 2400x1400x1000
Performance:
1. Specification model: HS-Y-200H
2. Temperature range: room temperature +10℃~60℃±1℃
3. Temperature fluctuation: ±1℃
4. Temperature deviation: ±1.0℃
5. Salt spray sedimentation rate: 1~2ml/80cm2·h
6. The temperature of the salt solution in the box: room temperature + 10 ℃ ~ 60 ℃ ± 1 ℃ "can be adjusted according to the actual requirements of customers"
7. Salt solution concentration: 5±0.5%
8. Working time: continuous/interval
9. Salt solution settling direction: free settling
10. Humidity range: 30%-98% R·H only displays the measured value
Spray method:
A. Air-flow spray method, continuous and gap optional. The spray of salt mist is provided by compressed air, through the compressed air line.
B. The pressure of the compressed air is controlled by a pressure reducing valve. A special solenoid valve shuts off the compressed air when the test equipment is closed.
C. Gas saturation purifier: The gas is heated, degreasing and humidified, and becomes a saturated gas that is isothermal, clean and humid with the box.
Salt solution supply system:
A. On the side, about 40 liters, made of PVC pressure-resistant material.
B. The saline solution can be stored in a special storage tank on the side of the box. A feed tank with a level switch to ensure solution continuity. The solution is passed through the connecting line to the nozzle, where compressed air is used to form a spray.
Programmable control system: TEMI880 color touch intelligent programmable temperature and humidity controller independently developed;
Compound salt spray test chamber test standard:
a. GB/T5170.8-1996 Verification method of environmental test equipment for electrical and electronic products: salt spray test equipment.
b. Meet the test standard: GB/T2423.17-1993 Environmental test method for electrical and electronic products Test A: Salt spray test method GB/T10587-2006
If you need to know more about our products, please call the service hotline: 0574-63454285 Welcome your calls!
Note: This product is delivered to the door for free, free installation and commissioning, free professional training for the customer's operators, free one-year warranty for the whole product, and lifetime service!