Product introduction:
The automatic/manual water adding system can automatically replenish the water level when the water level is insufficient, and the test is not interrupted. The precision glass nozzle can adjust the spray volume. The cone-shaped disperser of the spray tower of the spray volume evenly spreads the mist, and naturally falls on the test piece, and ensures that no crystalline salt is blocked. Double over-temperature protection, low water level warning alarm and stop working. The laboratory adopts the direct heating method of steam, the heating speed is fast and uniform, and the standby time is reduced. The saturated air bucket adopts Henry's law to be heated and humidified. And provide the humidity required by the laboratory.
Compliance with standards: GB10587-89, GB2423.17-93, "Basic Environmental Test Procedures for Electronic Products Ka: Salt Spray Test Method"
Product model and size:
| model |
Studio size (L*W*H) mm |
| HS-Y-60 |
600×400×450 |
| HS-Y-90 |
900×600×500 |
| HS-Y-120 |
1200×800×600 |
| HS-Y-160 |
1600×1000×600 |
| HS-Y-200 |
2000×1200×600 |
main feature:
1. Operating temperature of salt spray tester:
The operating temperature can be set according to CNS, JIS, ASTM standards:
A) Salt water test method:
(1) Laboratory: 35℃±1℃
(2) Saturated air barrel: 47℃±1℃
B) Corrosion resistance test method:
(1) Laboratory: 50℃±1℃
(2) Saturated air barrel: 63℃±1℃
2. The spray method of the salt spray tester:
(A) Cone diffuser: The size of the spray can be adjusted, and the mist can be evenly dispersed.
(B) Nozzle Taiwan: Glass Nozzle Material PYREX Precision Glass Nozzle
(C) Spray volume: 1~2mL/80cm?1hr
3. Safety device of salt spray machine:
(A) 1 group of water level controller
(B) 3 status warning lights
(C) 2 groups of over-temperature protection switches
|
